Foundation Repair Before & After Photos

A homeowner in Madison, CT, had old supports in their crawlspace that needed to be replaced, so they called us at Connecticut Basement Systems to find a new, permanent solution. One of our Salesmen, Matt Kraus, visited the home to assess the supports and propose our SmartJack support solution. 
Shortly after, our Foreman, Victor, and his crew installed the job. They replaced the old supports with our new SmartJack, which is made of galvanized steel and provides a permanent solution to ensure complete stabilization. 

Now with these in place, the homeowner can live with great peace of mind. 

A homeowner in Higganum, CT had floors in their home that were not stable. They called us at Connecticut Basement Systems to have our foundation supportworks team come out and solve their problems. After scheduling an appointment, one of our Sales Consultants, Matt Kraus, went out to the home to assess the issues. He informed the homeowner that our team would need to install SmartJacks in the crawl space in order to stabilize the floors. 

Then it was time for one of our Foremen, Sergio Alves, and Jacob Scott to do the installation. First, they installed the supplemental beams and then dug into the ground to fit in each SmarJack footing. Then they fully installed 9 SmartJacks, spacing them out under the beams. Once these were tight in place, the floor would become stabilized and there would be no sagging. This homeowner is happy with the results knowing their house is going to stay stable. 

A homeowner in Vernon Rockville, CT had slight bowing in their foundation walls so they reached out to our foundation specialists at Connecticut Basement Systems to find a solution. One of our Sales Consultants, Tim Kane, visited the home to assess their foundation and propose a solution that would give the homeowner peace of mind! 

Soon it would be time for one of our Foremen, Sergio Alves, and Jacob Scott to install the CarbonArmor strips. These carbon fiber strips are epoxied to the wall to strengthen and stabilize the bowing of the foundation. These carbon fibers are 10 times stronger than steel and easily installed, so this is a quick and permanent solution to stabilize and reinforce this wall! Now this homeowner has peace of mind of their basement walls! 

A homeowner in Hebron called us and said they had a shifting and settling foundation that they wanted us to repair. We sent out one of our Sales Consultants, Tim Kane, to the home to assess the issues and propose a solution that will solve this problem for good! 

One of our Foremen, Sergio Alves, and his helper Jacob Scott, would tackle the installation of this job. This job required push piers. They installed multiple around the outside of the home. These piers get installed below the foundation footing where they drive steel piers into the ground to lift the home into place and stabilize it. Once it is lifted and stabilized to a certain pressure that the homeowner is satisfied with, then the crew caps off each push pier bracket. Now this home is stable and has lifted into position. 

This homeowner in Columbia, CT noticed that their foundation was starting to bubble and cave in. Thankfully, they were in great hands once they called us at Connecticut Basement Systems. Sales Consultant Tim Kane was able to take a look at this foundation and provide an estimate for the homeowner. Once the date was set, our foreman, Sergio Alves, brought his team in to tackle this foundation!

They installed the PowerBrace Wall Repair System. This will stabilize the bowing walls, forcing them back into their original position. This crew will revisit the home in approximately 1-2 months to tighten and possibly push the wall in. Soon enough, this foundation will be as good as new!