Moldy Basement in Niantic
A moldy basement in Niantic that we were called in to dry out. Connecticut Basement Systems can fix it!
Moldy Basement in West Hartford, CT
Clearly this basement has a ground water problem. You can see evidence of seepage and mold on the wall.
Moldy Wall in Bethany, Connecticut
The wall in this Bethany, CT home is blemished by harmful mold and needs to be cleaned or replaced.
Mold in Northford, CT
A presence of mold and mildew in the basement, like this one in Northford, CT, can significantly worsen over time.
Moldy Basement in Danielson, CT
The basement of this home in Danielson, CT had mold along the bottoms of the walls, caused by flooding and high humidity. To prevent flooding, we installed our patented WaterGuard basement waterproofing system along the perimeter of the room. A SaniDry Basement Air System was also installed to decrease the overall humidity, removing the possibility of mold.
Moldy Wall in Dayville, CT
The walls of this basement in Dayville, CT are covered in mold. Mold can grow on any organic surface and often flourishes on the walls of damp basements. The paint is also peeling off of this wall due to the high humidity found in sub par basements. Our CleanSpace Wall System is made of reinforced plastic liner and will not allow mold to grow. It will not peel off the walls and will stop any leaks in the basement, keeping the humidity low.
Moldy Door in East Hampton, CT
The door of the basement of this home in East Hampton, CT has mold growth between the hinge. Mold can grow on any organic surface in a humid environment, making below grade basements with wood features a prime area for mold growth. We replaced this door with a Total Basement Finishing Door, made entirely from inorganic material to prevent any mold growth. Our doors are easy to paint and customize, and they are highly durable.
Damp Basement in Moosup, CT
This Moosup, CT home has a damp basement that is permitting mold growth. Mold grows well in the high humidity of below grade basements, but will not grow in a dry environment. To eliminate the potential for mold growth in this basement, we installed our SaniDry Basement Air System. This dehumidifier is much more powerful than a conventional model, and so will keep the basement drier than other dehumidifiers would. The basement is now dry and mold will no longer thrive.
Moldy Basement in South Woodstock, CT
Water seeping through cracks in the foundation of this South Woodstock, Connecticut home caused mold to grow on the concrete. Our waterproofing products are inorganic-- they will not support the growth of mold or mildew.
Moldy Basement in Windham, CT
The base of this Windham, Connecticut wall was damaged by mold, necessitating repair.
Moldy Basement in Oakville, CT
The basement of this Oakville, CT home has a lot of mold growth, visible on the walls. Mold grows well in high humidity, which often occurs in basements due to the the decrease in temperature. When the temperature is lower, air can hold less moisture, and water condenses on walls or other structures in basements. To eliminate this problem, we installed our SaniDry XP Basement Air System, a powerful dehumidifier. Unlike most dehumidifiers that need to be manually emptied daily, the SaniDry XP is self draining. The basement is now dry, and mold will no longer grow in the home.
Moldy Crawlspace in Pomfret, CT
The crawlspace of this Pomfret, CT home was extremely damp and had ceiling tiles made from organic materials. This made it highly vulnerable to mold growth, and mold grew all over the tiles. To decrease the humidity and eliminate the ability for mold to grow, we installed our SaniDry XP Basement Air System, a high powered, energy efficient dehumidifier. It is self emptying and removes up to 109 liters of water per day. The crawlspace is now dry and free of mold.
Moldy Basement in Westport, CT
A moldy basement like this one in Westport, CT, can lead to structural damage and health problems. To prevent this, we would recommend our basement dehumidifier. Since mold needs moisture to survive, a dehumidifier would effectively stop new mold spores from forming.
Moldy Wall in Sharon, CT
The base of the foundation in this Sharon, CT residence was allowing water to seep in, creating mold. To remedy this problem, we installed our patented WaterGuard System, which is resistant to clogs and has easy-to-access service ports. The system includes a written lifetime warranty, guaranteeing a dry basement for years to come.
Basement Mold in Sharon, CT
The mold in the corner of this Sharon, CT basement thrives on the dark, damp environment in the room. It is important to stop the mold growth-- the mold spores can cause severe health issues to people with allergies. Our SaniDry Basement Dehumidifier is able to pull moisture from the air and lower the relative humidity below 55%. These low humidity levels create an environment that is not suitable for house mold to thrive.
Moldy Wall in Canton, CT
Water seeped through the wall/floor joint in this Canton, CT basement, after which mold formed on the moist surface. To remedy this, our team installed the WaterGuard below-floor perimeter drain. It collects water from leaking walls to dry out the basement and prevent mold from forming.
Moldy Wall in Bethlehem, CT
The corner of this Bethlehem, CT home was moldy due to water seeping into the basement. We installed a WaterGuard perimeter drain to capture the water and send it to the sump pump system to prevent water from coming into the home.
Moldy Wall in East Granby, CT
A moldy basement wall like this one in East Granby, CT, is the result of water flowing into the basement through the hatchway. Our team installed a TrenchDrain System. This innovative drain is installed flush with a concrete floor; you can walk right over it. But the grated top will capture surface water before it can get where it doesn’t belong.
Moldy Wall in North Franklin, CT
Wet basements offer a prime environment for mold to grow in, and it often prospers as it did in this North Franklin, CT basement. Walls absorb moisture from the highly humid air, and mold can quickly take over a basement. We installed our WaterGuard sub-floor drainage system along the perimeter of the room. Our unique drains draw water out of the walls to prevent it from entering the basement ad keeping the area much more dry than it had been initially. This curbed the mold growth, keeping the basement safe and odor free for the homeowners.
Moldy Walls in Marion CT
This mold is the result of a damp basement. To counter this problem, our team installed a WaterGuard system. WaterGuard is a drainage channel engineered specifically to solve basement water problems effectively without worry of clogging from soil beneath the basement floor. It has large holes in the back to accept water and a flange with special segments to drain water from a basement wall leak.
Damp, Moldy Basement in Marion, CT
Mold spores are present nearly everywhere, growing when they meet sufficient temperature, moisture, and organic material to grow. 50% of homes have at least one resident with allergies, with the American Lung Association showing that 88 million Americans suffering from some sort of respiratory distress. 90% of people with allergies show sensitivity to mold spores.
Severe Mold in Marion, CT
The mold in this home was caused by water seeping into the basement. The SuperSump our team installed helped to drain water out of the basement.
Finished Basement in Gaylordsville, CT
Finished basements, like the one in this Gaylordsville, CT home, can be particularly vulnerable to mold and mildew growth due to the large quantities of organic material. If nothing is done to keep the area dry, mold will prosper on drywall, carpets, and any other organic material. To dry it out and protect the home, we installed our SaniDry XP Basement Air System. This powerful dehumidifier can remove up to 109 liters of water per day from the air and is self emptying. It is also highly energy efficient, with an ENERGY STAR® rating.
Weak Dehumidifier in Gaylordsville, CT
The homeowners of this Gaylordsville, CT basement installed a dehumidifier to keep the air in their basement dry. However, the dehumidifiers sold in big box stores are weak and rarely do enough to prevent mold growth. We replaced this one with our SaniDry XP Basement Air System. Our highly powerful dehumidifier removes up to 109 liters of water per day and is self emptying so the homeowners do not need to worry about remembering to remove the water. They now have a dry basement to enjoy.
Moldy Basement in Gaylordsville, CT
The mold on the floors and walls of this Gaylordsville, CT basement were a result of very high humidity levels in the area. This is a common problem in Connecticut basements, especially during the summer months. To make the air dry and prevent mold and mildew growth, we installed our SaniDry XP Basement Air System. It is a high powered dehumidifier that also comes with a charcoal filter to remove odors from the air. It is self emptying so the homeowners never have to worry about removing collected water, keeping the basement dry and free of mold.
Finished Basement in Bedford Hills, NY
Lurking behind the finished walls of this Bedford Hill, NY home was a severe mold problem. It was stinking up the basement and making the area unpleasant for the homeowners. This is caused by high levels of moisture in the basement environment. To dry it out, we installed our WaterGuard sub-floor perimeter drainage system. Our unique drains draw water out of the walls to keep the basement dry for years to come.
Moldy Finished Basement in Bedford Hills, NY
The finished basement in this Bedford Hills, NY home had strong odors, caused by mold and mildew growing throughout the area. This was because the basement had been finished before it was made dry, and the materials used to finish included many organic substances, supporting mold growth. To dry it out, we installed our WaterGuard sub-floor perimeter drainage system connected to our SuperSump pump system. This combined system will keep the area moisture free for years to come.
Moldy Well Equipment in Moodus, CT
This Moodus, CT basement had huge amounts of mold growth throughout the area. Even this well equipment had mold growing up the sides. This releases allergenic spores into the air and fills the basement with a nasty smell. To remove the humidity and prevent future mold growth, we installed our SaniDry XP Basement Air System. This powerful dehumidifier is self-emptying, so the homeowners do not have to worry about remembering to empty a collection tank.